Custom Hanger Product Holder
Peg space is where impulse buying happens, and a product that cannot hang simply does not get that space. A board holder gives any loose item a hanging structure, a branded surface and somewhere to put a barcode. It costs a fraction of a formed plastic pack. We produce a lot of hanger product holder work at ZEE Packaging and peg display is what it exists for.
Access To Peg Space
A hanger product holder gets a product onto a rack.
- Loose items cannot be merchandised on a peg
- The holder gives it a hanging structure
- Branding sits at eye level above the product
- A barcode makes it scannable at the till
- Stock control gets considerably easier
- Retailers will take hanging stock over loose goods
Most makers ordering a hanger product holder do so because a stockist asked for something peggable.
The Hole Carries Everything
Every failure happens at one small punched area.
- An unreinforced hole tears within days on a busy rack
- Board caliper must suit the product weight below
- Euro hole is what most peg racks are built around
- The hole should sit centered or the pack tilts
- Heavier products need a thicker board above them
- We reinforce every punched hole as standard
- Backing card with a hang hole the simplest hanger product holder
- Folded card holder printing on both faces
- With a die cut cradle holding the product mechanically
- Blister backed version sealed under a formed shell
- Sleeve style holder the product sliding into a pocket
- Shaped die cut following a logo or product outline
Sizes We Print Regular
Every hanger product holder is built to your product, though these run often:
- 3" x 5" for small items and accessories
- 4" x 6" for a standard product
- 5" x 8" for larger goods
- 2" x 3" for very small items
- 6" x 9" for bulkier products
- 7" x 10" for oversized formats
Send us the actual product, since cradle cuts and hole placement depend on how it sits.
Board And Print
- 18pt to 28pt card stock depending on product weight
- 24pt as a sensible standard for most goods
- White SBS where you want vivid color
- Kraft board for a natural or handmade position
- Matte lamination, which resists scuffing on a rack
- Reinforcement patch around every hang hole
Card stiffness matters more than people expect. A flimsy holder sags forward under a heavier product, which looks unfinished on a rack.
Materials Worth Choosing
- Recycled card stock, widely available in these grades
- FSC certified paper, certificate available on request
- Soy based ink through the whole run
- Board cradles rather than plastic blisters
- Uncoated stock, which recycles with no film
- Right sizing so no board is wasted per unit
What Happens On Your Order
- 100 unit minimum, so a small maker can order properly
- Free proof before anything prints
- Free artwork setup by our own designer
- Physical sample on request to check the product fit
- Urgent turnaround at 5 to 8 business days
- Free shipping worldwide with nothing hidden
Frequently Asked Questions
How much is a hanger product holder?
Rough estimate is $0.04 to $0.14 per unit plain, $0.07 to $0.20 with one color print and $0.12 to $0.32 for full color at moderate quantity. Volume moves it. Shipping is included in our price. This is estimate only, so ask our team for a exact quote.
Will the hang hole tear?
Not when reinforced, which we do as standard. Unreinforced punches are the failure we get shown most.
Which caliper should we use?
18pt for light items, 24pt to 28pt where the product has weight. Sagging looks poor on a rack.
Can you punch euro holes?
We do, reinforced. Euro is the shape most peg racks are designed around.
Can it hold the product without plastic?
Often, with a die cut cradle or slits. It suits lighter products particularly well.
Do you supply blister shells?
We print the board and can arrange forming and sealing alongside it.
Can you cut a custom shape?
Yes, following a logo or product outline. There is a small one off tooling cost.
