Custom Hemp Oil Boxes & Hemp Oil Packaging
Hemp oil sits in an odd spot on shelf. Half the buyers are treating it as a wellness supplement, the other half as a cooking or skincare ingredient, and the carton has to speak to whichever one you are selling to. Get that wrong and the hemp oil box confuses people before they ever pick it up. We print a lot of hemp oil packaging at ZEE Packaging and clarity is where we usually start.
Be Clear What You Are Selling
Hemp seed oil and CBD rich hemp extract are different products and buyers mix them up constantly.
- State clearly whether it is hemp seed oil or a cannabinoid extract
- If there is no CBD in it, say so, vague hemp oil packaging gets returned
- Carrier oil listed where relevant
- Intended use, ingestible, topical or culinary
- Extraction method if it is a selling point
- Cold pressed or CO2 extracted, buyers do look for this
We have seen brands lose trust simply because the hemp oil box did not make the distinction plainly.
Glass And Light Both Matter
- Amber or violet bottles already block some light, the carton adds another layer
- Die cut cradle so the bottle cannot rattle inside the hemp oil box
- Cradle should hold the shoulder rather than squeeze the label
- Coated inner face, oil residue marks bare board badly
- Dropper cap height sets the carton height, not the bottle body
- Corrugated outer whenever hemp oil packaging ships on its own
- Straight tuck end with cradle the standard retail hemp oil box
- Reverse tuck cheaper option for value range
- Seal end carton glued, gives tamper evidence
- Rigid lid and base premium hemp oil packaging
- Sleeve over a tray the rigid look at a lower cost
- Corrugated mailer ecommerce and subscription orders
Sizes We Print Regular
Every hemp oil box is built to your bottle, though these run often:
- 1.25" x 1.25" x 3.5" for a 15ml dropper
- 1.5" x 1.5" x 3.75" for a 30ml hemp oil box
- 1.75" x 1.75" x 4.25" for 60ml
- 2.25" x 2.25" x 6" for a 250ml culinary bottle
- 4" x 2" x 4" for a two bottle set
- 6" x 4" x 4" for a starter kit hemp oil packaging carton
Measure with the cap on, since that is always your tallest point.
Board Selection
- Natural kraft, easily the most requested stock in this category
- SBS C1S where you need brighter colour
- 18pt minimum, 20pt to 24pt on 60ml and above
- Rigid greyboard 36pt for the premium tier
- Corrugated E flute for shipping
- Recycled board where the brand story calls for it
Thin board bows under a filled glass bottle in days. We move clients up a caliper rather than fix it later.
Finish Options
- Matte or no lamination, it suits hemp oil packaging better than gloss
- Soft touch on the premium tier
- Blind deboss on kraft, quiet and it looks considered
- Spot UV used sparingly over the logo
- Foil in copper or bronze rather than bright gold
- Printed inner flap with dosing or usage guidance
Materials That Back The Claim
- Recycled kraft hemp oil box with no film
- FSC certified board, certificate on request
- Soy and water based inks
- Paperboard cradle instead of foam
- Refill carton so buyers keep the original bottle
- Right sized hemp oil box so you ship less air
What You Get With Us
- 100 unit minimum, so a new label can launch properly
- Free 3D mockup and flat proof every order
- Free dieline drawn by our own designer
- Urgent turnaround at 5 to 8 business days
- Free shipping worldwide, nothing hidden
- One contact from artwork right through to delivery
Frequently Asked Questions
Do you write the label wording?
No. We lay out exactly what you send, so have it approved by your own compliance contact first.
How do we stop the bottle breaking in post?
A cradle cut to the base plus a corrugated outer. Loose fit inside the hemp oil packaging is what causes nearly every breakage we get shown.
How much is a box of hemp oil?
Rough estimate is $0.22 to $0.70 per unit for a folding carton with cradle, $0.90 to $2.20 for corrugated mailer and $2.40 to $5.60 for rigid at moderate quantities. Foil and cradle move it. Shipping is included in our price. This is estimate only, so ask our team for a exact quote.
Should we add a window?
Usually not. Light degrades oil over time and a solid panel protects it far better than a window does.
Will kraft print my brand colour properly?
Not exactly, kraft mutes everything and colour sits warmer. We proof on the real stock so there is no surprise.
What board for a 250ml culinary bottle?
24pt minimum with a cradle, or corrugated if it ships alone. That much glass needs proper support.
Can you print dosing guidance inside?
Yes, on the inner flap. It frees up the front panel and it costs very little to add.
